Reading the repo
Opening the box…
Reading the repo
Opening the box…
Assembly instructions
Saved setup from just now
Will it work on macOS?
Needs Git: xcode-select --install
git clone https://github.com/Nolaris-Solutions-AB/M5Stick-KeySender.git cd M5Stick-KeySender
We couldn't spot a known stack. The AI guide below can read the code for you.
Download v1.0.0 or clone the repository:
git clone https://github.com/Nolaris-Solutions-AB/M5Stick-KeySender.git
Open firmware/KEY_SENDER/KEY_SENDER.ino in Arduino IDE.
In that same folder, copy secrets.example.h to secrets.h, and set your Wi-Fi credentials:
const char* WIFI_SSID = "YOUR_WIFI_SSID";
const char* WIFI_PASSWORD = "YOUR_WIFI_PASSWORD";
Never commit secrets.h; it is ignored by Git.
Install the required libraries, select the M5StickC board and the appropriate serial port (for example, COM4 on Windows).
Verify and Upload the sketch.
Pair M5StickC KEY SENDER with your computer using its Bluetooth settings.
Find the device's IP address on the display or via the Arduino Serial Monitor (115200 baud), then visit:
http://DEVICE_IP/
If Wi-Fi is unavailable or the credentials are incorrect, startup will wait for a connection.
No reports for macOS yet.
GitManual AI Agent reads the 2 key files and writes a step-by-step guide for macOS. Once written, it's saved for everyone.