Reading the repo
Opening the box…
Reading the repo
Opening the box…
How to install on Linux
A tiny BTC miner base on esp32 series,I'd rather call it BTC lottery
Saved setup from 4 h ago
Will it work on Linux?
The following table shows the supported development boards and their performance metrics:
| Board | Performance | Chip | | :------------------------------------------------------------------------------------- | :---------------: | :----------: | | NM-TV-154 | 1035.9 KH/s | ESP32-D0 | | ESP32 DEVKitC 32 | 1035.9 KH/s | ESP32-D0 | | Heltec WiFi LoRa32 v2 | 1035.5 KH/s | ESP32-D0 | | ESP32 2432S028R | 1025.3 KH/s | ESP32-D0 | | ESP32 2432s024 | 1025.1 KH/s | ESP32-D0 | | TTGO T-Display | 1025.2 KH/s | ESP32-D0 | | ESP32 3248s035 | 1025.1 KH/s | ESP32-D0 | | ESP32 CAM | 1025.1 KH/s | ESP32-D0 | | ELECROW esp32 display 2.4inch | 1025.1 KH/s | ESP32-D0 | | ELECROW esp32 display 2.8inch | 1025.1 KH/s | ESP32-D0 | | ESP32 32E LCD Display 3.2inch | 1025.1 KH/s | ESP32-D0 | | ESP32 32E LCD Display 4.0inch | 1025.1 KH/s | ESP32-D0 | | WT32-SC01 | 930.1 KH/s | ESP32-D0 | | Seeed XIAO ESP32-C3 | 396.9 KH/s | ESP32-C3 | | Heltec WiFi Kit32 v3 | 400.9 KH/s | ESP32-S3FN8 | | Heltec WiFi LoRa32 v3 | 400.7 KH/s | ESP32-S3FN8 | | Heltec Wireless Stick Lite v3 | 399.3 KH/s | ESP32-S3FN8 | | Heltec Wireless Stick v3 | 398.2 KH/s | ESP32-S3FN8 | | NM Bot Chain v1 | 393.8 KH/s | ESP32-S3FN8 | | Seeed XIAO ESP32-S3 | 393.7 KH/s | ESP32-S3FN8 | | ESP32-S3 0.42" OLED | 392.1 KH/s | ESP32-S3 | | LilyGO T-Display S3 AMOLED | 390.1 KH/s | ESP32-S3R8 | | Heltec Vision Master T190 | 388.4 KH/s | ESP32-S3R8 | | NM USB Chain v1 | 387.5 KH/s | ESP32-S3FN8 | | LilyGO T-Dongle S3 | 385.3 KH/s | ESP32-S3R8 | | LilyGO T-Display S3 | 384.5 KH/s | ESP32-S3R8 | | Waveshare ESP32 S3 LCD 1.47 | 384.5 KH/s | ESP32-S3R8 | | Waveshare ESP32 S3 LCD 1.47B | 383.5 KH/s | ESP32-S3R8 | | Waveshare ESP32 S3 Touch LCD 35 | 380.3 KH/s | ESP32-S3R8 | | ESP32-S3 Geek | 378.1 KH/s | ESP32-S3 | | LilyGO T-QT | 361.1 KH/s | ESP32-S3FN8 | | ESP32-C3 0.42" OLED | 315.1 KH/s | ESP32-C3 | | ESP32-C5 devkitc 1 | 150.2 KH/s | ESP32-C5 | | NM-CYD-C5 | 150.2 KH/s | ESP32-C5 |
Compare yours with the README's “Supported Hardware” list above before installing anything.
git clone https://github.com/NMminer1024/NMMiner.git cd NMMiner
Step 1: Open the NMMiner Flash Tool in Chrome or Edge browser.
Step 2: Select your board model and initiate the firmware update. The tool will automatically:
Note 1: If you're simply updating existing firmware, the above steps are sufficient. For first-time installations, firmware activation is required.
Note 2: If you lose your license, re-flash your device using the NMMiner Flash Tool to receive a new license automatically.
No reports for Linux yet.
GitManual AI Agent reads the 1 key files and writes a step-by-step guide for Linux. Once written, it's saved for everyone.