Is Minimal-Network-Switch-Verilog-Implementation still maintained?

Yes, active. Last change 8 days ago.

Can I trust Minimal-Network-Switch-Verilog-Implementation?

New, little track record. 0 stars, 5 months old. Look at the code and the owner before running it.

How to install Minimal-Network-Switch-Verilog-Implementation on Linux (TharinduHimantha/Minimal-Network-Switch-Verilog-Implementation)

TharinduHimantha/Minimal-Network-Switch-Verilog-Implementation

A minimal Layer 2 network switch implemented in Verilog at the Register-Transfer Level (RTL), featuring FSM control logic, FIFO buffering, and hardware-based packet routing.

Shell scripts

Before you start

Is it free?: YesOpen source (Apache-2.0).
Still maintained?: Yes, activeLast change 8 days ago.
Can I trust it?: New, little track record0 stars, 5 months old. Look at the code and the owner before running it.

All modules were developed and smoke-tested with Icarus Verilog. Hence requires Icarus Verilog 11 or newer to simulate the build.

./run_sim.sh        # 4-port system test + MAC aging test
./run_sim.sh 8      # same system test with NUM_PORTS = 8

To custom instantiate the switch, change the parameters as needed

l2_switch_top #(
    .NUM_PORTS      (4),
    .ING_FIFO_DEPTH (256),
    .EGR_FIFO_DEPTH (256),
    .EGR_STORE_FWD  (1)
) u_switch (
    .clk(clk), .rst_n_async(rst_n),
    .rx_data(rx_data), .rx_sop(rx_sop), .rx_eop(rx_eop), .rx_valid(rx_valid), .rx_ready(rx_ready),
    .tx_data(tx_data), .tx_sop(tx_sop), .tx_eop(tx_eop), .tx_valid(tx_valid), .tx_ready(tx_ready),
    .table_ready(table_ready),
    .cnt_rx_frames(), .cnt_tx_frames(), .cnt_runts(), .cnt_vlan_frames(),
    .cnt_filtered(), .cnt_rx_stall(), .cnt_tx_stall()
);

Wait for table_ready (about 128 cycles at the default table size) before sending traffic.

<br>

Contact

TharinduHimantha/Minimal-Network-Switch-Verilog-Implementation

Before you start

Yes, it runs on Linux

Before you start: Simulation & Quick Start

2 steps on Linux

Clone the repository

Follow the README: Simulation & Quick Start

Did you get it running?

Still stuck? Get a written guide